Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios

The goal of this work was to study the mechanical behavior of concrete with recycled Polyethylene Therephtalate (PET), varying the water/cement ratio (0.50 and 0.60), PET content (10 and 20 vol%) and the particle size. Also, the influence of the thermal degradation of PET in the concrete was studied, when the blends were exposed to different temperatures (200, 400, 600 °C). Results indicate that PET-filled concrete, when volume proportion and particle size of PET increased, showed a decrease in compressive strength, splitting tensile strength, modulus of elasticity and ultrasonic pulse velocity; however, the water absorption increased. On the other hand, the flexural strength of concrete-PET when exposed to a heat source was strongly dependent on the temperature, water/cement ratio, as well as on the PET content and particle size. Moreover, the activation energy was affected by the temperature, PET particles location on the slabs and water/cement ratio.     

Study of new reinforcing materials for cementitious panel production

Environmental Science and Pollution Research - The development of building materials using new types of raw materials is currently on demand by society and the industry. It is intended to reduce...     

Recycling and reuse of waste from electricity distribution networks as reinforcement agents in polymeric composites

Of the waste generated from electricity distribution networks, wooden posts treated with chromated copper arsenate (CCA) and ceramic insulators make up the majority of the materials for which no effective recycling scheme has been developed. This study aims to recycle and reuse this waste as reinforcement elements in polymer composites and hybrid composites, promoting an ecologically and economically viable alternative for the disposal of this waste. The CCA wooden posts were cut, crushed and recycled via acid leaching using 0.2 and 0.4 N H₂SO₄ in triplicate at 70 °C and then washed and dried. The ceramic insulators were fragmented in a hydraulic press and separated by particle size using a vibrating sieve. The composites were mixed in a twin-screw extruder and injected into the test specimens, which were subjected to physical, mechanical, thermal and morphological characterization. The results indicate that the acid treatment most effective for removing heavy metals in the wood utilizes 0.4 N H₂SO₄. However, the composites made from wood treated with 0.2 N H₂SO₄ exhibited the highest mechanical properties of the composites, whereas the use of a ceramic insulator produces composites with better thermal stability and impact strength. This study is part of the research and development project of ANEEL (Agência Nacional de Energia Elétrica) and funded by CPFL (Companhia Paulista de Força e Luz).     

Biofiltration of fugitive methane emissions from landfills using scum from municipal wastewater treatment plants as alternative substrate

Journal of Material Cycles and Waste Management - Biofilters have been recognized as a key technology in the mitigation of greenhouse gases (GHG) emitted by landfills. This study aimed to evaluate...     

Storage or Run-of-river Reservoirs: Exploring the Ecological Effects of Dam Operation on Stability and Species Interactions of Fish Assemblages

Environmental Management - Water level variation has an important role in the biology of fish species, driving behavior, feeding, and reproduction both in natural and modified environments. In...     

Gastroenteric Viruses Detection in a Drinking Water Distribution-to-Consumption System in a Low-Income Community in Rio de Janeiro

Food and Environmental Virology - The availability of drinking water is one of the main determinants of quality of life, disease prevention and the promotion of health. Viruses are important agents...     

Cytogenetic evaluation and the association with polymorphisms of the CPY1A1 and NR1I3 genes in individuals exposed to BTEX

The gas station attendants are exposed daily to chemical agents that compose gasoline, such as BTEX (benzene, toluene, ethylbenzene, and xylene), and the exposure to these agents can cause a variety of effects on the human health. Among the various possible cell alterations associated with these exposures are the formation of micronuclei and of binucleated cells which are used as indicators of clastogenic action. Benzene, the main carcinogenic agent, is metabolized to more soluble forms and easily excreted by isoenzymes of cytochrome P450, such as CYP1A1. The CYP1A1 gene is highly polymorphic and one of its allele variations can be detected by the use of restriction endonucleasis MspI and is originated by the transition of a thymine by a cytosine (3798T>C), resulting in the polymorphic allele CYP1A1*2A. The objective of this study was to evaluate the cytogenetic damage induced by the exposure to BTEX and to associate it with the polymorphisms of the CYP1A1 and NR1I3 genes. Samples of exfoliated cells from the oral mucosa of 27 gas station attendants and from a control group were collected. The results found show that the group exposed to BTEX presents significantly higher alterations than those in the control group for micronuclei (MN; 6.85?±?1.33 vs. 2.96?±?1.91, P?<?0.001) and for the total of nuclear alterations observed (MN + binucleated cells (BNC); 9.59?±?4.73 vs. 5.07?±?2.21, P?<?0.001). When comparing the cytological alterations and the genotypes among the exposed individuals for the polymorphism 3798T>C of the CYP1A1 gene, homozygotes TT present MN + BNC significantly higher than carriers of the allele C (10.88?±?5.36 vs. 5.33?±?2.52, P?=?0.028). No association was observed in the control group or for the NR1I3 gene. These results show that molecular and cytogenetic data can be used in the future as tools to monitor individuals exposed to such compounds.     

Social signals and sustainability: ambiguity about motivations can affect status perceptions of efficiency and curtailment behaviors

Perceived status can affect the diffusion of pro-environmental behaviors and sustainable consumption. However, the status of different forms of sustainable consumption has not been adequately explored. Previous studies suggest that curtailment behaviors are associated with low or neutral status, while efficiency behaviors are associated with high status. However, these studies have generally examined a small number of behaviors. Drawing from costly signaling theory, we developed a mixed methods study to explore whether and why pro-environmental behaviors are perceived to be associated with high or low status, the perceived motivation for those behaviors, and the relationship between motivation and status. We conducted structured, interactive interviews with 71 participants to explore perceptions of 19 behaviors. Using quantitative and qualitative analyses, we find that efficiency is rated higher status than curtailment largely due to monetary considerations. Efficiency is also perceived to be motivated by environmental concern to a greater degree than curtailment. Understanding the motivation for behaviors clarifies the social signal because it provides insights into whether one is incurring personal costs. Importantly, it is often unclear whether low-cost curtailment behaviors are adopted by choice rather than financial need. Ambiguity about the intentionality of behaviors results in such behaviors being perceived as lower status. Those who argue that curtailment will be necessary for long-term sustainability must address status perceptions because social stigmas could hinder their adoption. Overcoming such stigmas may require, indicating that curtailment behaviors are voluntary, but it may be more effective to use social or economic mechanisms to increase efficiency behaviors.     

Are renewable energy policies upsetting carbon dioxide emissions? The case of Latin America countries

Environmental Science and Pollution Research - The impact of renewable energy policies in carbon dioxide emissions was analysed for a panel of ten Latin American countries, for the period from 1991...     

Solar radiation synthetic series for power purchase agreements

The present paper proposes a methodology based on the implementation and assessment of autoregressive (AR) solar radiation models for generating synthetic series and providing guidance on bidding strategies for power purchase agreements. The work considered conventional and periodic AR models with different lag orders, assessing the models against real solar radiation measurements. The synthetic series generation process developed 1000 1-year monthly solar radiation scenarios that were later employed for simulating electric energy production and power purchase agreement models. This application allowed one to evaluate the risk associated with the energy supply security, supporting bidding strategies in energy auctions. A real study case is also illustrated in detail, referring to a spot in the Brazilian best irradiance area.